REVER ONE AND ONE 75 SLED
THIS IS THE ULTIMATE SLED WITH ENDLESS CONFIGURATION
Extremely versatile, the sled can be configured for any camera on the market including Black Magic, Red, Arri, or sony Venice.
It is compact, strong, rigid, and lightweight.
The modular design can be easily modified, upgraded, and maintained.
TOPSTAGE
Easily attachable STANDARD dovetail
Regulation fore/aft and side by side controllers you can adjust weight distribution effortlessly to deliver perfect dynamic balance.
Vibration free
12 and 24 FULL POWER
2 Batteries Hotswap,
the 3rd Battery will work in series only for 24V.
3x 12v power D-tap outputs on the upper box with a maximum draw of 10 amps combined.
1x 12V Lemo 1B outputs with a maximum draw of 15 amps.
1x 12V Lemo 1B outputs on the Lower box with a maximum draw of 15 amps.
24V volts outputs on the upper box with a maximum draw of 15 Amps.
2 x HDSDl 6G (OPTIONAL 12G can be add)
GIMBAL
Featuring aluminum 7075 and Swiss Hibrid ceramic dry bearings the Gimbal is a super smooth Perfectly centered.
With a tool-free clamp mechanism smartly positioned to not interfiere with the operators hand placement.
manufacured with the hightest tolerance in the CNC Machine.
50MM AND 1.75-INCH CARBON FIBER POST
For maximum stability, Rever features a 50mm wide, 2-section carbon fiber post. Fully extendable up to 120cm – great for high mode and low mode.
Now you can order the sled with our new custom post 1.75" inches design to fit the Steadicam M2 gimbal with the Steadicam volt kit.
MONITOR MOUNT
Attaches to the center of gravity of the monitor with 2 1/4 thumb knobs
with the rotating system the monitor position can be adjusted without any tool
Fits on the lower and center post.
If utilizing the telescopic system, you can attach 5 to 8 inches monitors with side mounts 1/4holes